13 December 2014

Systems Engineering: Processes (Just the Quotes)

"Natural processes should be judged different from mechanical ones because they are self-organizing." (Immanuel Kant, "Critique of Judgment", 1790)

"Every process has laws, known or unknown, according to which it must take place. A consciousness of them is so far from being necessary to the process, that we cannot discover what they are, except by analyzing the results it has left us." (Lord William T Kelvin , "An Outline of the Necessary Laws of Thought", 1866)

"Most surprising and far-reaching analogies revealed themselves between apparently quite disparate natural processes. It seemed that nature had built the most various things on exactly the same pattern; or, in the dry words of the analyst, the same differential equations hold for the most various phenomena. (Ludwig Boltzmann, "On the methods of theoretical physics", 1892)

"Nature prefers the more probable states to the less probable because in nature processes take place in the direction of greater probability. Heat goes from a body at higher temperature to a body at lower temperature because the state of equal temperature distribution is more probable than a state of unequal temperature distribution." (Max Planck, "The Atomic Theory of Matter", 1909)

"The prototype of all infinite processes is repetition. […] Our very concept of the infinite derives from the notion that what has been said or done once can always be repeated." (Tobias Dantzig, "Number: The Language of Science", 1930)

"By a model we thus mean any physical or chemical system which has a similar relation-structure to that of the process it imitates. By ’relation-structure’ I do not mean some obscure non-physical entity which attends the model, but the fact that it is a physical working model which works in the same way as the process it parallels, in the aspects under consideration at any moment." (Kenneth Craik, "The Nature of Explanation", 1943)

"Every process, event, happening - call it what you will; in a word, everything that is going on in Nature means an increase of the entropy of the part of the world where it is going on. Thus a living organism continually increases its entropy - or, as you may say, produces positive entropy – and thus tends to approach the dangerous state of maximum entropy, which is death. It can only keep aloof from it, i.e. alive, by continually drawing from its environment negative entropy – which is something very positive as we shall immediately see. What an organism feeds upon is negative entropy. Or, to put it less paradoxically, the essential thing in metabolism is that the organism succeeds in freeing itself from all the entropy it cannot help producing while alive." (Erwin Schrödinger, "What is Life?", 1944)

"The concept of teleological mechanisms however it be expressed in many terms, may be viewed as an attempt to escape from these older mechanistic formulations that now appear inadequate, and to provide new and more fruitful conceptions and more effective methodologies for studying self-regulating processes, self-orienting systems and organisms, and self-directing personalities. Thus, the terms feedback, servomechanisms, circular systems, and circular processes may be viewed as different but equivalent expressions of much the same basic conception." (Lawrence K Frank, 1948)

"A model is a qualitative or quantitative representation of a process or endeavor that shows the effects of those factors which are significant for the purposes being considered. A model may be pictorial, descriptive, qualitative, or generally approximate in nature; or it may be mathematical and quantitative in nature and reasonably precise. It is important that effective means for modeling be understood such as analog, stochastic, procedural, scheduling, flow chart, schematic, and block diagrams." (Harold Chestnut, "Systems Engineering Tools", 1965)

"Reversible processes are not, in fact, processes at all, they are sequences of states of equilibrium. The processes which we encounter in real life are always irreversible processes." (Arnold Sommerfeld, "Thermodynamics and Statistical Mechanics", Lectures on Theoretical - Physics Vol. V, 1956)

"Theories are usually introduced when previous study of a class of phenomena has revealed a system of uniformities. […] Theories then seek to explain those regularities and, generally, to afford a deeper and more accurate understanding of the phenomena in question. To this end, a theory construes those phenomena as manifestations of entities and processes that lie behind or beneath them, as it were." (Carl G Hempel, "Philosophy of Natural Science", 1966)

"System' is the concept that refers both to a complex of interdependencies between parts, components, and processes, that involves discernible regularities of relationships, and to a similar type of interdependency between such a complex and its surrounding environment." (Talcott Parsons, "Systems Analysis: Social Systems", 1968)

"An analogy is a relationship between two entities, processes, or what you will, which allows inferences to be made about one of the things, usually that about which we know least, on the basis of what we know about the other. […] The art of using analogy is to balance up what we know of the likenesses against the unlikenesses between two things, and then on the basis of this balance make an inference as to what is called the neutral analogy, that about which we do not know." (Rom Harré," The Philosophies of Science" , 1972)

"A model is an abstract description of the real world. It is a simple representation of more complex forms, processes and functions of physical phenomena and ideas." (Moshe F Rubinstein & Iris R Firstenberg, "Patterns of Problem Solving", 1975)

"Structure is the type of connection between the elements of a whole. […] . Structure is a composite whole, or an internally organised content. […] Structure implies not only the position of its elements in space but also their movement in time, their sequence and rhythm, the law of mutation of a process. So structure is actually the law or set of laws that determine a system's composition and functioning, its properties and stability." (Alexander Spirkin, "Dialectical Materialism", 1983)

"Systems philosophy brings forth a reorganization of ways of thinking. It creates a new worldview, a new paradigm of perception and explanation, which is manifested in integration, holistic thinking, purpose-seeking, mutual causality, and process-focused inquiry." (Béla H Bánáthy, "Systems Design of Education", 1991)

"We can predict only those things we set up to be predictable, not what we encounter in the real world of living and reactive processes." (Bill Mollison, "Permaculture: A Designers' Manual", 1988)

"A conceptual model is a qualitative description of the system and includes the processes taking place in the system, the parameters chosen to describe the processes, and the spatial and temporal scales of the processes." (A Avogadro & R C Ragaini, "Technologies for Environmental Cleanup", 1993)

"Model building is the art of selecting those aspects of a process that are relevant to the question being asked. As with any art, this selection is guided by taste, elegance, and metaphor; it is a matter of induction, rather than deduction. High science depends on this art." (John H Holland," Hidden Order: How Adaptation Builds Complexity", 1995)

"The term mental model refers to knowledge structures utilized in the solving of problems. Mental models are causal and thus may be functionally defined in the sense that they allow a problem solver to engage in description, explanation, and prediction. Mental models may also be defined in a structural sense as consisting of objects, states that those objects exist in, and processes that are responsible for those objects’ changing states." (Robert Hafner & Jim Stewart, "Revising Explanatory Models to Accommodate Anomalous Genetic Phenomena: Problem Solving in the ‘Context of Discovery’", Science Education 79 (2), 1995)

"Events may appear to us to be random, but this could be attributed to human ignorance about the details of the processes involved." (Brain S Everitt, "Chance Rules", 1999)

"Most physical processes in the real world are nonlinear. It is our abstraction of the real world that leads us to the use of linear systems in modeling these processes. These linear systems are simple, understandable, and, in many situations, provide acceptable simulations of the actual processes. Unfortunately, only the simplest of linear processes and only a very small fraction of the nonlinear having verifiable solutions can be modeled with linear systems theory. The bulk of the physical processes that we must address are, unfortunately, too complex to reduce to algorithmic form - linear or nonlinear. Most observable processes have only a small amount of information available with which to develop an algorithmic understanding. The vast majority of information that we have on most processes tends to be nonnumeric and nonalgorithmic. Most of the information is fuzzy and linguistic in form." (Timothy J Ross & W Jerry Parkinson, "Fuzzy Set Theory, Fuzzy Logic, and Fuzzy Systems", 2002)

"The vast majority of information that we have on most processes tends to be nonnumeric and nonalgorithmic. Most of the information is fuzzy and linguistic in form." (Timothy J Ross & W Jerry Parkinson, "Fuzzy Set Theory, Fuzzy Logic, and Fuzzy Systems", 2002)

"What is a mathematical model? One basic answer is that it is the formulation in mathematical terms of the assumptions and their consequences believed to underlie a particular ‘real world’ problem. The aim of mathematical modeling is the practical application of mathematics to help unravel the underlying mechanisms involved in, for example, economic, physical, biological, or other systems and processes." (John A Adam, "Mathematics in Nature", 2003)

"All models are mental projections of our understanding of processes and feedbacks of systems in the real world. The general approach is that models are as good as the system upon which they are based. Models should be designed to answer specific questions and only incorporate the necessary details that are required to provide an answer." (Hördur V Haraldsson & Harald U Sverdrup, "Finding Simplicity in Complexity in Biogeochemical Modelling", 2004)

"Chance is just as real as causation; both are modes of becoming. The way to model a random process is to enrich the mathematical theory of probability with a model of a random mechanism. In the sciences, probabilities are never made up or 'elicited' by observing the choices people make, or the bets they are willing to place. The reason is that, in science and technology, interpreted probability exactifies objective chance, not gut feeling or intuition. No randomness, no probability." (Mario Bunge, "Chasing Reality: Strife over Realism", 2006)

"A diagram is a graphic shorthand. Though it is an ideogram, it is not necessarily an abstraction. It is a representation of something in that it is not the thing itself. In this sense, it cannot help but be embodied. It can never be free of value or meaning, even when it attempts to express relationships of formation and their processes. At the same time, a diagram is neither a structure nor an abstraction of structure." (Peter Eisenman, "Written Into the Void: Selected Writings", 1990-2004, 2007)

"Cybernetics is the study of systems and processes that interact with themselves and produce themselves from themselves." (Louis Kauffman, 2007)

"Nature is capable of building complex structures by processes of self-organization; simplicity begets complexity." (Victor J Stenger, "God: The Failed Hypothesis", 2010)

"Processes that use data change far more frequently than the data structures themselves." (Charles D Tupper, "Data Architecture: From Zen to Reality", 2011)

"The central activity of engineering, as distinguished from science, is the design of new devices, processes and systems." (Myron Tribus, "Rational Descriptions, Decisions and Designs", 2016)

No comments:

Related Posts Plugin for WordPress, Blogger...

About Me

My photo
IT Professional with more than 24 years experience in IT in the area of full life-cycle of Web/Desktop/Database Applications Development, Software Engineering, Consultancy, Data Management, Data Quality, Data Migrations, Reporting, ERP implementations & support, Team/Project/IT Management, etc.