🔭Data Science: Normality (Just the Quotes)

"Logging size transforms the original skewed distribution into a more symmetrical one by pulling in the long right tail of the distribution toward the mean. The short left tail is, in addition, stretched. The shift toward symmetrical distribution produced by the log transform is not, of course, merely for convenience. Symmetrical distributions, especially those that resemble the normal distribution, fulfill statistical assumptions that form the basis of statistical significance testing in the regression model." (Edward R Tufte, "Data Analysis for Politics and Policy", 1974)

"When the statistician looks at the outside world, he cannot, for example, rely on finding errors that are independently and identically distributed in approximately normal distributions. In particular, most economic and business data are collected serially and can be expected, therefore, to be heavily serially dependent. So is much of the data collected from the automatic instruments which are becoming so common in laboratories these days. Analysis of such data, using procedures such as standard regression analysis which assume independence, can lead to gross error. Furthermore, the possibility of contamination of the error distribution by outliers is always present and has recently received much attention. More generally, real data sets, especially if they are long, usually show inhomogeneity in the mean, the variance, or both, and it is not always possible to randomize." (George E P Box, "Some Problems of Statistics and Everyday Life", Journal of the American Statistical Association, Vol. 74 (365), 1979)

"Linear regression assumes that in the population a normal distribution of error values around the predicted Y is associated with each X value, and that the dispersion of the error values for each X value is the same. The assumptions imply normal and similarly dispersed error distributions." (Fred C Pampel, "Linear Regression: A primer", 2000)

"The central limit theorem says that, under conditions almost always satisfied in the real world of experimentation, the distribution of such a linear function of errors will tend to normality as the number of its components becomes large. The tendency to normality occurs almost regardless of the individual distributions of the component errors. An important proviso is that several sources of error must make important contributions to the overall error and that no particular source of error dominate the rest." (George E P Box et al, "Statistics for Experimenters: Design, discovery, and innovation" 2nd Ed., 2005)

"Two things explain the importance of the normal distribution: (1) The central limit effect that produces a tendency for real error distributions to be 'normal like'. (2) The robustness to nonnormality of some common statistical procedures, where 'robustness' means insensitivity to deviations from theoretical normality." (George E P Box et al, "Statistics for Experimenters: Design, discovery, and innovation" 2nd Ed., 2005)

"In error analysis the so-called 'chi-squared' is a measure of the agreement between the uncorrelated internal and the external uncertainties of a measured functional relation. The simplest such relation would be time independence. Theory of the chi-squared requires that the uncertainties be normally distributed. Nevertheless, it was found that the test can be applied to most probability distributions encountered in practice." (Manfred Drosg, "Dealing with Uncertainties: A Guide to Error Analysis", 2007)

"To fulfill the requirements of the theory underlying uncertainties, variables with random uncertainties must be independent of each other and identically distributed. In the limiting case of an infinite number of such variables, these are called normally distributed. However, one usually speaks of normally distributed variables even if their number is finite." (Manfred Drosg, "Dealing with Uncertainties: A Guide to Error Analysis", 2007)

"[…] the Central Limit Theorem says that if we take any sequence of small independent random quantities, then in the limit their sum (or average) will be distributed according to the normal distribution. In other words, any quantity that can be viewed as the sum of many small independent random effects. will be well approximated by the normal distribution. Thus, for example, if one performs repeated measurements of a fixed physical quantity, and if the variations in the measurements across trials are the cumulative result of many independent sources of error in each trial, then the distribution of measured values should be approximately normal." (David Easley & Jon Kleinberg, "Networks, Crowds, and Markets: Reasoning about a Highly Connected World", 2010)

"Statistical inference is really just the marriage of two concepts that we’ve already discussed: data and probability (with a little help from the central limit theorem)." (Charles Wheelan, "Naked Statistics: Stripping the Dread from the Data", 2012)

"The central limit theorem tells us that in repeated samples, the difference between the two means will be distributed roughly as a normal distribution." (Charles Wheelan, "Naked Statistics: Stripping the Dread from the Data", 2012)

"According to the central limit theorem, it doesn’t matter what the raw data look like, the sample variance should be proportional to the number of observations and if I have enough of them, the sample mean should be normal." (Kristin H Jarman, "The Art of Data Analysis: How to answer almost any question using basic statistics", 2013)

"For a confidence interval, the central limit theorem plays a role in the reliability of the interval because the sample mean is often approximately normal even when the underlying data is not. A prediction interval has no such protection. The shape of the interval reflects the shape of the underlying distribution. It is more important to examine carefully the normality assumption by checking the residuals […]." (DeWayne R Derryberry, "Basic data analysis for time series with R", 2014)

"When data is not normal, the reason the formulas are working is usually the central limit theorem. For large sample sizes, the formulas are producing parameter estimates that are approximately normal even when the data is not itself normal. The central limit theorem does make some assumptions and one is that the mean and variance of the population exist. Outliers in the data are evidence that these assumptions may not be true. Persistent outliers in the data, ones that are not errors and cannot be otherwise explained, suggest that the usual procedures based on the central limit theorem are not applicable." (DeWayne R Derryberry, "Basic data analysis for time series with R", 2014)

"Why are you testing your data for normality? For large sample sizes the normality tests often give a meaningful answer to a meaningless question (for small samples they give a meaningless answer to a meaningful question)." (Greg Snow, "R-Help", 2014)

"The variance, the standard deviation, mean absolute deviation, and median absolute deviation from the median are not equivalent estimates, even in the case where the data comes from a normal distribution. In fact, the standard deviation is always greater than the mean absolute deviation, which itself is greater than the median absolute deviation. Sometimes, the median absolute deviation is multiplied by a constant scaling factor (it happens to work out to 1.4826) to put MAD on the same scale as the standard deviation in the case of a normal distribution." (Peter C Bruce & Andrew G Bruce, "Statistics for Data Scientists: 50 Essential Concepts", 2016)

"At very small time scales, the motion of a particle is more like a random walk, as it gets jostled about by discrete collisions with water molecules. But virtually any random movement on small time scales will give rise to Brownian motion on large time scales, just so long as the motion is unbiased. This is because of the Central Limit Theorem, which tells us that the aggregate of many small, independent motions will be normally distributed." (Field Cady, "The Data Science Handbook", 2017)

"Theoretically, the normal distribution is most famous because many distributions converge to it, if you sample from them enough times and average the results. This applies to the binomial distribution, Poisson distribution and pretty much any other distribution you’re likely to encounter (technically, any one for which the mean and standard deviation are finite)." (Field Cady, "The Data Science Handbook", 2017)

"Many statistical procedures perform more effectively on data that are normally distributed, or at least are symmetric and not excessively kurtotic (fat-tailed), and where the mean and variance are approximately constant. Observed time series frequently require some form of transformation before they exhibit these distributional properties, for in their 'raw' form they are often asymmetric." (Terence C Mills, "Applied Time Series Analysis: A practical guide to modeling and forecasting", 2019)

"[...] the Central Limit Theorem [...] says that the distribution of sample means tends towards the form of a normal distribution with increasing sample size, almost regardless of the shape of the original data distribution." (David Spiegelhalter, "The Art of Statistics: Learning from Data", 2019)

🔭Data Science: Decision-Making (Just the Quotes)

"There are, indeed, plenty of ways in which statistics can help in the process of decision-taking. But exaggerated claims for the role they can play merely serve to confuse rather than clarify issues of public policy, and lead those responsible for action to oscillate between over-confidence and over-scepticism in using them." (Ely Devons, "Essays in Economics", 1961)

"Statistics is a body of methods and theory applied to numerical evidence in making decisions in the face of uncertainty." (Lawrence Lapin, "Statistics for Modern Business Decisions", 1973)

"A model for simulating dynamic system behavior requires formal policy descriptions to specify how individual decisions are to be made. Flows of information are continuously converted into decisions and actions. No plea about the inadequacy of our understanding of the decision-making processes can excuse us from estimating decision-making criteria. To omit a decision point is to deny its presence - a mistake of far greater magnitude than any errors in our best estimate of the process." (Jay W Forrester, "Policies, decisions and information sources for modeling", 1994)

"The science of statistics may be described as exploring, analyzing and summarizing data; designing or choosing appropriate ways of collecting data and extracting information from them; and communicating that information. Statistics also involves constructing and testing models for describing chance phenomena. These models can be used as a basis for making inferences and drawing conclusions and, finally, perhaps for making decisions." (Fergus Daly et al, "Elements of Statistics", 1995)

"So we pour in data from the past to fuel the decision-making mechanisms created by our models, be they linear or nonlinear. But therein lies the logician's trap: past data from real life constitute a sequence of events rather than a set of independent observations, which is what the laws of probability demand. [...] It is in those outliers and imperfections that the wildness lurks." (Peter L Bernstein, "Against the Gods: The Remarkable Story of Risk", 1996)

"Under conditions of uncertainty, both rationality and measurement are essential to decision-making. Rational people process information objectively: whatever errors they make in forecasting the future are random errors rather than the result of a stubborn bias toward either optimism or pessimism. They respond to new information on the basis of a clearly defined set of preferences. They know what they want, and they use the information in ways that support their preferences." (Peter L Bernstein, "Against the Gods: The Remarkable Story of Risk", 1996)

"Delay time, the time between causes and their impacts, can highly influence systems. Yet the concept of delayed effect is often missed in our impatient society, and when it is recognized, it’s almost always underestimated. Such oversight and devaluation can lead to poor decision making as well as poor problem solving, for decisions often have consequences that don’t show up until years later. Fortunately, mind mapping, fishbone diagrams, and creativity/brainstorming tools can be quite useful here." (Stephen G Haines, "The Manager's Pocket Guide to Strategic and Business Planning", 1998)

"Just as dynamics arise from feedback, so too all learning depends on feedback. We make decisions that alter the real world; we gather information feedback about the real world, and using the new information we revise our understanding of the world and the decisions we make to bring our perception of the state of the system closer to our goals." (John D Sterman, "Business dynamics: Systems thinking and modeling for a complex world", 2000)

"Balanced Scorecard theory is flawed because it presents managers with a scorecard which gives no score – that is no single-valued measure how they have performed. Thus managers evaluated with such a system […] have no way to make principled or purposeful decisions." (Michael Jensen,"Value Maximization, Stakeholder Theory, and the Corporate Objective Function", Journal of Applied Corporate Finance, 2001)

"Compared to traditional statistical studies, which are often hindsight, the field of data mining finds patterns and classifications that look toward and even predict the future. In summary, data mining can (1) provide a more complete understanding of data by finding patterns previously not seen and (2) make models that predict, thus enabling people to make better decisions, take action, and therefore mold future events." (Robert Nisbet et al, "Handbook of statistical analysis and data mining applications", 2009)

"What is so unconventional about the statistical way of thinking? First, statisticians do not care much for the popular concept of the statistical average; instead, they fixate on any deviation from the average. They worry about how large these variations are, how frequently they occur, and why they exist. [...] Second, variability does not need to be explained by reasonable causes, despite our natural desire for a rational explanation of everything; statisticians are frequently just as happy to pore over patterns of correlation. [...] Third, statisticians are constantly looking out for missed nuances: a statistical average for all groups may well hide vital differences that exist between these groups. Ignoring group differences when they are present frequently portends inequitable treatment. [...] Fourth, decisions based on statistics can be calibrated to strike a balance between two types of errors. Predictably, decision makers have an incentive to focus exclusively on minimizing any mistake that could bring about public humiliation, but statisticians point out that because of this bias, their decisions will aggravate other errors, which are unnoticed but serious. [...] Finally, statisticians follow a specific protocol known as statistical testing when deciding whether the evidence fits the crime, so to speak. Unlike some of us, they don’t believe in miracles. In other words, if the most unusual coincidence must be contrived to explain the inexplicable, they prefer leaving the crime unsolved." (Kaiser Fung, "Numbers Rule the World", 2010)

"Statistics is the scientific discipline that provides methods to help us make sense of data. […] The field of statistics teaches us how to make intelligent judgments and informed decisions in the presence of uncertainty and variation." (Roxy Peck & Jay L Devore, "Statistics: The Exploration and Analysis of Data" 7th Ed, 2012)

"There is convincing evidence that data-driven decision-making and big data technologies substantially improve business performance. Data science supports data-driven decision-making - and sometimes conducts such decision-making automatically - and depends upon technologies for 'big data' storage and engineering, but its principles are separate." (Foster Provost & Tom Fawcett, "Data Science for Business", 2013)

"A study that leaves out data is waving a big red flag. A decision to include or exclude data sometimes makes all the difference in the world. This decision should be based on the relevance and quality of the data, not on whether the data support or undermine a conclusion that is expected or desired." (Gary Smith, "Standard Deviations", 2014)

"It is important to remember that predictive data analytics models built using machine learning techniques are tools that we can use to help make better decisions within an organization and are not an end in themselves. It is paramount that, when tasked with creating a predictive model, we fully understand the business problem that this model is being constructed to address and ensure that it does address it." (John D Kelleher et al, "Fundamentals of Machine Learning for Predictive Data Analytics: Algorithms, worked examples, and case studies", 2015)

"Big data is, in a nutshell, large amounts of data that can be gathered up and analyzed to determine whether any patterns emerge and to make better decisions." (Daniel Covington, Analytics: Data Science, Data Analysis and Predictive Analytics for Business, 2016)

"Machine learning is often associated with the automation of decision making, but in practice, the process of constructing a predictive model generally requires a human in the loop. While computers are good at fast, accurate numerical computation, humans are instinctively and instantly able to identify patterns. The bridge between these two necessary skill sets lies in visualization - the precise and accurate rendering of data by a computer in visual terms and the immediate assignation of meaning to that data by humans." (Benjamin Bengfort et al, "Applied Text Analysis with Python: Enabling Language-Aware Data Products with Machine Learning", 2018)

"The goal of data science is to improve decision making by basing decisions on insights extracted from large data sets. As a field of activity, data science encompasses a set of principles, problem definitions, algorithms, and processes for extracting nonobvious and useful patterns from large data sets. It is closely related to the fields of data mining and machine learning, but it is broader in scope." (John D Kelleher & Brendan Tierney, "Data Science", 2018)

"Ideally, a decision maker or a forecaster will combine the outside view and the inside view - or, similarly, statistics plus personal experience. But it’s much better to start with the statistical view, the outside view, and then modify it in the light of personal experience than it is to go the other way around. If you start with the inside view you have no real frame of reference, no sense of scale - and can easily come up with a probability that is ten times too large, or ten times too small." (Tim Harford, "The Data Detective: Ten easy rules to make sense of statistics", 2020)

"Our machines are helpers, not decision makers. Their insights are not the final word in the discussion, merely the work of our most nimble observers who can ramp up time spent on analysis by factors that our counterparts even a generation ago would have a hard time believing." (Kate Strachnyi, "ColorWise: A Data Storyteller’s Guide to the Intentional Use of Color", 2023)

🔭Data Science: Misconceptions (Just the Quotes)

"Science does not begin with facts; one of its tasks is to uncover the facts by removing misconceptions." (Lancelot L Whyte, "Accent on Form", 1954)

"A common misconception is that an effect exists only if it is statistically significant and that it does not exist if it is not [statistically significant]." (Jonas Ranstam, "A common misconception about p-value and its consequences", Acta Orthopaedica Scandinavica 67, 1996)

"The standard deviation (often SD) is a measure of variability. When we calculate the standard deviation of a sample, we are using it as an estimate of the variability of the population from which the sample was drawn. For data with a normal distribution, about 95% of individu als will have values within 2 standard deviations of the mean, the other 5% being equally scattered above and below these limits. Contrary to popular misconception, the standard deviation is a valid measure of variability regardless of the distribution. About 95% of observa tions of any distribution usually fall within the 2 standard deviation limits, though those outside may all be at one end. We may choose a different summary statistic, how ever, when data have a skewed distribution." (Douglas G Altman & J Martin Bland, "Statistics Notes: Standard Deviations And Standard Errors", British Medical Journal Vol. 331 (7521) 2005)

"[...] the term statistical misconception refers to any of several widely held but incorrect notions about statistical concepts, about procedures for analyzing data and about the meaning of results produced by such analyses. To illustrate, many people think that (1) normal curves are bell shaped, (2) a correlation coeffi cient should never be used to address questios of causality, and (3) the level of signifi cance dictates the probability of a Type I error. Some people, of course, have only one or two (rather than all three) of these misconceptions, and a few individuals realize that all three of those beliefs are false."(Schuyler W Huck, "Statistical Misconceptions", 2008)

"Science would be better understood if we called theories ‘misconceptions’ from the outset, instead of only after we have discovered their successors." (David Deutsch, "Beginning of Infinity", 2011)

"A popular misconception holds that the era of Big Data means the end of a need for sampling. In fact, the proliferation of data of varying quality and relevance reinforces the need for sampling as a tool to work efficiently with a variety of data, and minimize bias. Even in a Big Data project, predictive models are typically developed and piloted with samples." (Peter C Bruce & Andrew G Bruce, "Statistics for Data Scientists: 50 Essential Concepts", 2016)

"An oft-repeated rule of thumb in any sort of statistical model fitting is 'you can't fit a model with more parameters than data points'. This idea appears to be as wide-spread as it is incorrect. On the contrary, if you construct your models carefully, you can fit models with more parameters than datapoints [...]. A model with more parameters than datapoints is known as an under-determined system, and it's a common misperception that such a model cannot be solved in any circumstance. [...] this misconception, which I like to call the 'model complexity myth' [...] is not true in general, it is true in the specific case of simple linear models, which perhaps explains why the myth is so pervasive." (Jake Vanderplas", "The Model Complexity Myth", 2015)

🔭Data Science: Boosting (Just the Quotes)

"In bagging, generating complementary base-learners is left to chance and to the unstability of the learning method. In boosting, we actively try to generate complementary base-learners by training the next learner boosting on the mistakes of the previous learners." (Ethem Alpaydin, "Introduction to Machine Learning" 2nd Ed, 2010)

"The key idea behind boosting techniques is to use a weak learning algorithm to build a strong learner, that is, an accurate PAC-learning algorithm. To do so, boosting techniques use an ensemble method: they combine different base classifiers returned by a weak learner to create a more accurate predictor." (Mehryar Mohri et al, "Foundations of Machine Learning", 2012)

"Decision trees are also discriminative models. Decision trees are induced by recursively partitioning the feature space into regions belonging to the different classes, and consequently they define a decision boundary by aggregating the neighboring regions belonging to the same class. Decision tree model ensembles based on bagging and boosting are also discriminative models." (John D Kelleher et al, "Fundamentals of Machine Learning for Predictive Data Analytics: Algorithms, Worked Examples, and Case Studies", 2015)

"Boosting defines an objective function to measure the performance of a model given a certain set of parameters. The objective function contains two parts: regularization and training loss, both of which add to one another. The training loss measures how predictive our model is on the training data. The most commonly used training loss function includes mean squared error and logistic regression. The regularization term controls the complexity of the model, which helps avoid overfitting." (Danish Haroon, "Python Machine Learning Case Studies", 2017)

"Boosting is a non-linear flexible regression technique that helps increase the accuracy of trees by assigning more weights to wrong predictions. The reason for inducing more weight is so the model can emphasize more on these wrongly predicted samples and tune itself to increase accuracy. The gradient boosting method solves the inherent problem in boosting trees (i.e., low speed and human interpretability). The algorithm supports parallelism by specifying the number of threads." (Danish Haroon, "Python Machine Learning Case Studies", 2017)

"Gradient boosted decision trees are among the most powerful and widely used models for supervised learning. Their main drawback is that they require careful tuning of the parameters and may take a long time to train. Similarly to other tree-based models, the algorithm works well without scaling and on a mixture of binary and continuous features. As with other tree-based models, it also often does not work well on high-dimensional sparse data." (Andreas C Müller & Sarah Guido, "Introduction to Machine Learning with Python: A Guide for Data Scientists", 2017)

"In Boosting, the selection of samples is done by giving more and more weight to hard-to-classify observations. Gradient boosting classification produces a prediction model in the form of an ensemble of weak predictive models, usually decision trees. It generalizes the model by optimizing for the arbitrary differentiable loss function. At each stage, regression trees fit on the negative gradient of binomial or multinomial deviance loss function." (Danish Haroon, "Python Machine Learning Case Studies", 2017)

"The danger of overfitting is particularly severe when the training data is not a perfect gold standard. Human class annotations are often subjective and inconsistent, leading boosting to amplify the noise at the expense of the signal. The best boosting algorithms will deal with overfitting though regularization. The goal will be to minimize the number of non-zero coefficients, and avoid large coefficients that place too much faith in any one classifier in the ensemble." (Steven S Skiena, "The Data Science Design Manual", 2017)

"The no free lunch theorems set limits on the range of optimality of any method. That is, each methodology has a ‘catchment area’ where it is optimal or nearly so. Often, intuitively, if the optimality is particularly strong then the effectiveness of the methodology falls off more quickly outside its catchment area than if its optimality were not so strong. Boosting is a case in point: it seems so well suited to binary classification that efforts to date to extend it to give effective classification (or regression) more generally have not been very successful. Overall, it remains to characterize the catchment areas where each class of predictors performs optimally, performs generally well, or breaks down." (Bertrand S Clarke & Jennifer L. Clarke, "Predictive Statistics: Analysis and Inference beyond Models", 2018)

"A recurring theme in machine learning is combining predictions across multiple models. There are techniques called bagging and boosting which seek to tweak the data and fit many estimates to it. Averaging across these can give a better prediction than any one model on its own. But here a serious problem arises: it is then very hard to explain what the model is (often referred to as a 'black box'). It is now a mixture of many, perhaps a thousand or more, models." (Robert Grant, "Data Visualization: Charts, Maps and Interactive Graphics", 2019)

🔭Data Science: Domains (Just the Quotes)

"Methods perform well if the conditions of their derivation are met, with no method capable of covering all possible conditions. More strongly put, each good method has a domain on which it may be best, and different methods have different domains so the task is to characterize those domains and then figure out which domain a given problem’s solution is likely to be in. This of course, is extraordinarily difficult in its own right." (Bertrand Clarke et al, "Principles and Theory for Data Mining and Machine Learning", 2009)

"Much of machine learning is concerned with devising different models, and different algorithms to fit them. We can use methods such as cross validation to empirically choose the best method for our particular problem. However, there is no universally best model - this is sometimes called the no free lunch theorem. The reason for this is that a set of assumptions that works well in one domain may work poorly in another." (Kevin P Murphy, "Machine Learning: A Probabilistic Perspective", 2012)

"An attempt to use the wrong model for a given data set is likely to provide poor results. Therefore, the core principle of discovering outliers is based on assumptions about the structure of the normal patterns in a given data set. Clearly, the choice of the 'normal' model depends highly upon the analyst’s understanding of the natural data patterns in that particular domain." (Charu C Aggarwal, "Outlier Analysis", 2013)

"Bayesian networks provide a more flexible representation for encoding the conditional independence assumptions between the features in a domain. Ideally, the topology of a network should reflect the causal relationships between the entities in a domain. Properly constructed Bayesian networks are relatively powerful models that can capture the interactions between descriptive features in determining a prediction." (John D Kelleher et al, "Fundamentals of Machine Learning for Predictive Data Analytics: Algorithms, worked examples, and case studies", 2015)

"Bayesian networks use a graph-based representation to encode the structural relationships - such as direct influence and conditional independence - between subsets of features in a domain. Consequently, a Bayesian network representation is generally more compact than a full joint distribution (because it can encode conditional independence relationships), yet it is not forced to assert a global conditional independence between all descriptive features. As such, Bayesian network models are an intermediary between full joint distributions and naive Bayes models and offer a useful compromise between model compactness and predictive accuracy." (John D Kelleher et al, "Fundamentals of Machine Learning for Predictive Data Analytics: Algorithms, worked examples, and case studies", 2015)

"Big data is based on the feedback economy where the Internet of Things places sensors on more and more equipment. More and more data is being generated as medical records are digitized, more stores have loyalty cards to track consumer purchases, and people are wearing health-tracking devices. Generally, big data is more about looking at behavior, rather than monitoring transactions, which is the domain of traditional relational databases. As the cost of storage is dropping, companies track more and more data to look for patterns and build predictive models." (Neil Dunlop, "Big Data", 2015)

"The main advantage of decision tree models is that they are interpretable. It is relatively easy to understand the sequences of tests a decision tree carried out in order to make a prediction. This interpretability is very important in some domains. [...] Decision tree models can be used for datasets that contain both categorical and continuous descriptive features. A real advantage of the decision tree approach is that it has the ability to model the interactions between descriptive features. This arises from the fact that the tests carried out at each node in the tree are performed in the context of the results of the tests on the other descriptive features that were tested at the preceding nodes on the path from the root. Consequently, if there is an interaction effect between two or more descriptive features, a decision tree can model this."  (John D Kelleher et al, "Fundamentals of Machine Learning for Predictive Data Analytics: Algorithms, Worked Examples, and Case Studies", 2015)

"Feature extraction is also the most creative part of data science and the one most closely tied to domain expertise. Typically, a really good feature will correspond to some real‐world phenomenon. Data scientists should work closely with domain experts and understand what these phenomena mean and how to distill them into numbers." (Field Cady, "The Data Science Handbook", 2017)

"Data analysis and data mining are concerned with unsupervised pattern finding and structure determination in data sets. The data sets themselves are explicitly linked as a form of representation to an observational or otherwise empirical domain of interest. 'Structure' has long been understood as symmetry which can take many forms with respect to any transformation, including point, translational, rotational, and many others. Symmetries directly point to invariants, which pinpoint intrinsic properties of the data and of the background empirical domain of interest. As our data models change, so too do our perspectives on analysing data." (Fionn Murtagh, "Data Science Foundations: Geometry and Topology of Complex Hierarchic Systems and Big Data Analytics", 2018)

"Data scientists should have some domain expertise. Most data science projects begin with a real-world, domain-specific problem and the need to design a data-driven solution to this problem. As a result, it is important for a data scientist to have enough domain expertise that they understand the problem, why it is important, an dhow a data science solution to the problem might fit into an organization’s processes. This domain expertise guides the data scientist as she works toward identifying an optimized solution." (John D Kelleher & Brendan Tierney, "Data Science", 2018)

"Using data science, we can uncover the important patterns in a data set, and these patterns can reveal the important attributes in the domain. The reason why data science is used in so many domains is that it doesn’t matter what the problem domain is: if the right data are available and the problem can be clearly defined, then data science can help."  (John D Kelleher & Brendan Tierney, "Data Science", 2018)

"The ability to go beyond human domain knowledge is usually achieved by inductive learning methods that are unfettered from the imperfections in the domain knowledge of deductive methods." (Charu C Aggarwal, "Artificial Intelligence: A Textbook", 2021)

🔭Data Science: Success (Just the Quotes)

 "[…] the statistical prediction of the future from the past cannot be generally valid, because whatever is future to any given past, is in tum past for some future. That is, whoever continually revises his judgment of the probability of a statistical generalization by its successively observed verifications and failures, cannot fail to make more successful predictions than if he should disregard the past in his anticipation of the future. This might be called the ‘Principle of statistical accumulation’." (Clarence I Lewis, "Mind and the World-Order: Outline of a Theory of Knowledge", 1929)

"The most important application of the theory of probability is to what we may call 'chance-like' or 'random' events, or occurrences. These seem to be characterized by a peculiar kind of incalculability which makes one disposed to believe - after many unsuccessful attempts - that all known rational methods of prediction must fail in their case. We have, as it were, the feeling that not a scientist but only a prophet could predict them. And yet, it is just this incalculability that makes us conclude that the calculus of probability can be applied to these events." (Karl R Popper, "The Logic of Scientific Discovery", 1934)

"[Statistics] is both a science and an art. It is a science in that its methods are basically systematic and have general application; and an art in that their successful application depends to a considerable degree on the skill and special experience of the statistician, and on his knowledge of the field of application, e.g. economics." (Leonard H C Tippett, "Statistics", 1943)

"Statistics provides a quantitative example of the scientific process usually described qualitatively by saying that scientists observe nature, study the measurements, postulate models to predict new measurements, and validate the model by the success of prediction." (Marshall J Walker, "The Nature of Scientific Thought", 1963)

"Changes of variables can be helpful for iterative and parametric solutions even if they do not linearize the problem. For example, a change of variables may change the 'shape' of J(x) into a more suitable form. Unfortunately there seems to be no general way to choose the 'right' change of variables. Success depends on the particular problem and the engineer's insight. However, the possibility of a change of variables should always be considered."(Fred C Scweppe, "Uncertain dynamic systems", 1973)

"There is a universality about mathematics; what was created to explain one phenomenon is very often later found to be useful in explaining other, apparently unrelated, phenomena. Theories that were developed to explain some poorly measured effects are often found to fit later, much more accurate measurements. Furthermore, from measurements over a limited range the theory is often found to fit a far wider range. Finally, and perhaps most unreasonably, quite regularly from the mathematics alone new phenomena, previously unknown and unsuspected, are successfully predicted. This universality of mathematics could, of course, be a reflection of the way the human mind works and not of the external world, but most people believe it reflects reality." (Richard W Hamming, "Methods of Mathematics Applied to Calculus, Probability, and Statistics", 1985)

"One of the critical success factors for any method and its application is its ability to facilitate communication, avoiding information overload. So for larger models, the question is how to guide the reader into different parts of the model." (Peter Coad & Edward Yourdon, "Object-Oriented Analysis" 2nd Ed., 1991)

"The ability of neural networks to operate successfully on inputs that did not form part of the training set is one of their most important characteristics. Networks are capable of finding common elements in all the training examples belonging to the same class, and will then respond appropriately when these elements are encountered again. Optimising this capability is an important consideration when designing a network." (Paul Cilliers, "Complexity and Postmodernism: Understanding Complex Systems", 1998)

"Most dashboards fail to communicate efficiently and effectively, not because of inadequate technology (at least not primarily), but because of poorly designed implementations. No matter how great the technology, a dashboard's success as a medium of communication is a product of design, a result of a display that speaks clearly and immediately. Dashboards can tap into the tremendous power of visual perception to communicate, but only if those who implement them understand visual perception and apply that understanding through design principles and practices that are aligned with the way people see and think." (Stephen Few, "Information Dashboard Design", 2006)

"Information design, when successful - whether in print, on the web, or in the environment - represents the functional balance of the meaning of the information, the skills and inclinations of the designer, and the perceptions, education, experience, and needs of the audience." (Joel Katz, "Designing Information: Human factors and common sense in information design", 2012)

"Successful information design in movement systems gives the user the information he needs - and only the information he needs - at every decision point." (Joel Katz, "Designing Information: Human factors and common sense in information design", 2012) 

"You can give your data product a better chance of success by carefully setting the users’ expectations. [...] One under-appreciated facet of designing data products is how the user feels after using the product. Does he feel good? Empowered? Or disempowered and dejected?" (Dhanurjay Patil, "Data Jujitsu: The Art of Turning Data into Product", 2012)

"Data mining is a craft. As with many crafts, there is a well-defined process that can help to increase the likelihood of a successful result. This process is a crucial conceptual tool for thinking about data science projects. [...] data mining is an exploratory undertaking closer to research and development than it is to engineering." (Foster Provost, "Data Science for Business", 2013)

"Decision trees are an important tool for decision making and risk analysis, and are usually represented in the form of a graph or list of rules. One of the most important features of decision trees is the ease of their application. Being visual in nature, they are readily comprehensible and applicable. Even if users are not familiar with the way that a decision tree is constructed, they can still successfully implement it. Most often decision trees are used to predict future scenarios, based on previous experience, and to support rational decision making." (Jelena Djuris et al, "Neural computing in pharmaceutical products and process development", Computer-Aided Applications in Pharmaceutical Technology, 2013)

"We are seduced by patterns and we want explanations for these patterns. When we see a string of successes, we think that a hot hand has made success more likely. If we see a string of failures, we think a cold hand has made failure more likely. It is easy to dismiss such theories when they involve coin flips, but it is not so easy with humans. We surely have emotions and ailments that can cause our abilities to go up and down. The question is whether these fluctuations are important or trivial." (Gary Smith, "Standard Deviations", 2014)

"We emphasize that while there are some common techniques for feature learning one may want to try, the No-Free-Lunch theorem implies that there is no ultimate feature learner. Any feature learning algorithm might fail on some problem. In other words, the success of each feature learner relies (sometimes implicitly) on some form of prior assumption on the data distribution. Furthermore, the relative quality of features highly depends on the learning algorithm we are later going to apply using these features." (Shai Shalev-Shwartz & Shai Ben-David, "Understanding Machine Learning: From Theory to Algorithms", 2014)

"Whether or not a model works is also a matter of opinion. After all, a key component of every model, whether formal or informal, is its definition of success." (Cathy O'Neil, "Weapons of Math Destruction: How Big Data Increases Inequality and Threatens Democracy", 2016)

"All human storytellers bring their subjectivity to their narratives. All have bias, and possibly error. Acknowledging and defusing that bias is a vital part of successfully using data stories. By debating a data story collaboratively and subjecting it to critical thinking, organizations can get much higher levels of engagement with data and analytics and impact their decision making much more than with reports and dashboards alone." (James Richardson, 2017)

"Extracting good features is the most important thing for getting your analysis to work. It is much more important than good machine learning classifiers, fancy statistical techniques, or elegant code. Especially if your data doesn’t come with readily available features (as is the case with web pages, images, etc.), how you reduce it to numbers will make the difference between success and failure." (Field Cady, "The Data Science Handbook", 2017)

"The field of big-data analytics is still littered with a few myths and evidence-free lore. The reasons for these myths are simple: the emerging nature of technologies, the lack of common definitions, and the non-availability of validated best practices. Whatever the reasons, these myths must be debunked, as allowing them to persist usually has a negative impact on success factors and Return on Investment (RoI). On a positive note, debunking the myths allows us to set the right expectations, allocate appropriate resources, redefine business processes, and achieve individual/organizational buy-in." (Prashant Natarajan et al, "Demystifying Big Data and Machine Learning for Healthcare", 2017)

"Uncertainty is an adversary of coldly logical algorithms, and being aware of how those algorithms might break down in unusual circumstances expedites the process of fixing problems when they occur - and they will occur. A data scientist’s main responsibility is to try to imagine all of the possibilities, address the ones that matter, and reevaluate them all as successes and failures happen." (Brian Godsey, "Think Like a Data Scientist", 2017)

"The no free lunch theorems set limits on the range of optimality of any method. That is, each methodology has a ‘catchment area’ where it is optimal or nearly so. Often, intuitively, if the optimality is particularly strong then the effectiveness of the methodology falls off more quickly outside its catchment area than if its optimality were not so strong. Boosting is a case in point: it seems so well suited to binary classification that efforts to date to extend it to give effective classification (or regression) more generally have not been very successful. Overall, it remains to characterize the catchment areas where each class of predictors performs optimally, performs generally well, or breaks down." (Bertrand S Clarke & Jennifer L. Clarke, "Predictive Statistics: Analysis and Inference beyond Models", 2018)

"[...] the focus on Big Data AI seems to be an excuse to put forth a number of vague and hand-waving theories, where the actual details and the ultimate success of neuroscience is handed over to quasi- mythological claims about the powers of large datasets and inductive computation. Where humans fail to illuminate a complicated domain with testable theory, machine learning and big data supposedly can step in and render traditional concerns about finding robust theories. This seems to be the logic of Data Brain efforts today. (Erik J Larson, "The Myth of Artificial Intelligence: Why Computers Can’t Think the Way We Do", 2021)

"The idea that we can predict the arrival of AI typically sneaks in a premise, to varying degrees acknowledged, that successes on narrow AI systems like playing games will scale up to general intelligence, and so the predictive line from artificial intelligence to artificial general intelligence can be drawn with some confidence. This is a bad assumption, both for encouraging progress in the field toward artificial general intelligence, and for the logic of the argument for prediction." (Erik J Larson, "The Myth of Artificial Intelligence: Why Computers Can’t Think the Way We Do", 2021)

🔭Data Science: Central Tendency (Just the Quotes)

"An average value is a single value within the range of the data that is used to represent all of the values in the series. Since an average is somewhere within the range of the data, it is sometimes called a measure of central value." (Frederick E Croxton & Dudley J Cowden, "Practical Business Statistics", 1937

"A good estimator will be unbiased and will converge more and more closely (in the long run) on the true value as the sample size increases. Such estimators are known as consistent. But consistency is not all we can ask of an estimator. In estimating the central tendency of a distribution, we are not confined to using the arithmetic mean; we might just as well use the median. Given a choice of possible estimators, all consistent in the sense just defined, we can see whether there is anything which recommends the choice of one rather than another. The thing which at once suggests itself is the sampling variance of the different estimators, since an estimator with a small sampling variance will be less likely to differ from the true value by a large amount than an estimator whose sampling variance is large." (Michael J Moroney, "Facts from Figures", 1951)

"The mode would form a very poor basis for any further calculations of an arithmetical nature, for it has deliberately excluded arithmetical precision in the interests of presenting a typical result. The arithmetic average, on the other hand, excellent as it is for numerical purposes, has sacrificed its desire to be typical in favour of numerical accuracy. In such a case it is often desirable to quote both measures of central tendency.(Michael J Moroney,Facts from Figures", 1951)

"An average is sometimes called a 'measure of central tendency' because individual values of the variable usually cluster around it. Averages are useful, however, for certain types of data in which there is little or no central tendency." (William A Spirr & Charles P Bonini,Statistical Analysis for Business Decisions" 3rd Ed., 1967)

"Central tendency is the formal expression for the notion of where data is centered, best understood by most readers as 'average'. There is no one way of measuring where data are centered, and different measures provide different insights." (Charles Livingston & Paul Voakes,Working with Numbers and Statistics: A handbook for journalists", 2005)

"Distributional shape is an important attribute of data, regardless of whether scores are analyzed descriptively or inferentially. Because the degree of skewness can be summarized by means of a single number, and because computers have no difficul ty providing such measures (or estimates) of skewness, those who prepare research reports should include a numerical index of skewness every time they provide measures of central tendency and variability." (Schuyler W Huck, "Statistical Misconceptions", 2008)

"It is best to think of the various kinds of central tendency indices as falling into three categories based on the computational procedures one uses to summarize the data. One category deals with means, with techniques put into this category if scores are added together and then divided by the number of scores that are summed. The second category involves different kinds of medians, with various techniques grouped here if the goal is to find some sort of midpoint. The third category contains different kinds of modes, with these techniques focused on the frequency with which scores appear in the data." (Schuyler W Huck, "Statistical Misconceptions", 2008)

"Various measures of central tendency have been invented because the proper notion of the 'average' score can vary from study to study. Depending on the kind of data collected, the degree of skewness in the data, and the possible existence of outliers, it may be that the most appropriate measure of central tendency is found by doing something other than (1) dividing the sum of the scores by the number of scores (to get the mean), (2) calculating the midpoint in the distribution (to get the median), or (3) determining the most frequently observed score (to get the mode)." (Schuyler W Huck, "Statistical Misconceptions", 2008)

"Measures of central tendency and variability work together to give you a concise summary of your data. When you don’t have any outliers, the mean is the most common indicator of central tendency. But on its own, the mean doesn’t tell you much. It isn’t until you also take the standard deviation into account that you really have a sense of your data."  (Shonna D Watters et al, "The Practical Guide for HR Analytics: Using data to inform, transform, and empower HR decisions", 2019)

"Statistical analysis seeks to develop concise summary figures which describe a large body of quantitative data. One of the most widely used set of summary figures is known as measures of location, which are often referred to as averages, measures of central tendency or central location. The purpose for computing an average value for a set of observations is to obtain a single value which is representative of all the items and which the mind can grasp simply and quickly. The single value is the point or location around which the individual items cluster." (Lawrence J Kaplan)

🔭Data Science: Fitting (Just the Quotes)

"It may often happen that an inefficient statistic is accurate enough to answer the particular questions at issue. There is however, one limitation to the legitimate use of inefficient statistics which should be noted in advance. If we are to make accurate tests of goodness of fit, the methods of fitting employed must not introduce errors of fitting comparable to the errors of random sampling; when this requirement is investigated, it appears that when tests of goodness of fit are required, the statistics employed in fitting must be not only consistent, but must be of 100 percent efficiency. This is a very serious limitation to the use of inefficient statistics, since in the examination of any body of data it is desirable to be able at any time to test the validity of one or more of the provisional assumptions which have been made." (Sir Ronald A Fisher, "Statistical Methods for Research Workers", 1925)

"The empirical data are usually available in the form of a table exhibiting pairs of corresponding values of the variables. Since the given values do not lie exactly along a straight hne, a parabola, an exponential curve or a power curve, it is necessar}' to find a curve that fits the given data approximately. This process is called curve fitting, and the equation of the curve which fits the data approximately is called an empirical equation. When fitting a curve to a set of given points, we must assume a general form for the equation which we are going to use to represent the curve." (William L Schaaf, "Analytic Geometry; a college course guide", 1962)

"[…] fitting lines to relationships between variables is often a useful and powerful method of summarizing a set of data. Regression analysis fits naturally with the development of causal explanations, simply because the research worker must, at a minimum, know what he or she is seeking to explain." (Edward R Tufte, "Data Analysis for Politics and Policy", 1974)

"Fitting lines to relationships between variables is the major tool of data analysis. Fitted lines often effectively summarize the data and, by doing so, help communicate the analytic results to others. Estimating a fitted line is also the first step in squeezing further information from the data." (Edward R Tufte, "Data Analysis for Politics and Policy", 1974)

"Exploratory data analysis, EDA, calls for a relatively free hand in exploring the data, together with dual obligations: (•) to look for all plausible alternatives and oddities - and a few implausible ones, (graphic techniques can be most helpful here) and (•) to remove each appearance that seems large enough to be meaningful - ordinarily by some form of fitting, adjustment, or standardization [...] so that what remains, the residuals, can be examined for further appearances." (John W Tukey, "Introduction to Styles of Data Analysis Techniques", 1982)

"Fitting data means finding mathematical descriptions of structure in the data. An additive shift is a structural property of univariate data in which distributions differ only in location and not in spread or shape. […] The process of identifying a structure in data and then fitting the structure to produce residuals that have the same distribution lies at the heart of statistical analysis. Such homogeneous residuals can be pooled, which increases the power of the description of the variation in the data." (William S Cleveland, "Visualizing Data", 1993)

"Many good things happen when data distributions are well approximated by the normal. First, the question of whether the shifts among the distributions are additive becomes the question of whether the distributions have the same standard deviation; if so, the shifts are additive. […] A second good happening is that methods of fitting and methods of probabilistic inference, to be taken up shortly, are typically simple and on well understood ground. […] A third good thing is that the description of the data distribution is more parsimonious." (William S Cleveland, "Visualizing Data", 1993)

"Many of the applications of visualization in this book give the impression that data analysis consists of an orderly progression of exploratory graphs, fitting, and visualization of fits and residuals. Coherence of discussion and limited space necessitate a presentation that appears to imply this. Real life is usually quite different. There are blind alleys. There are mistaken actions. There are effects missed until the very end when some visualization saves the day. And worse, there is the possibility of the nearly unmentionable: missed effects." (William S Cleveland, "Visualizing Data", 1993)

"Time-series forecasting is essentially a form of extrapolation in that it involves fitting a model to a set of data and then using that model outside the range of data to which it has been fitted. Extrapolation is rightly regarded with disfavour in other statistical areas, such as regression analysis. However, when forecasting the future of a time series, extrapolation is unavoidable." (Chris Chatfield, "Time-Series Forecasting" 2nd Ed, 2000)

"It is not always convenient to remember that the right model for a population can fit a sample of data worse than a wrong model - even a wrong model with fewer parameters. We cannot rely on statistical diagnostics to save us, especially with small samples. We must think about what our models mean, regardless of fit, or we will promulgate nonsense." (Leland Wilkinson, "The Grammar of Graphics" 2nd Ed., 2005)

"You might say that there’s no reason to bother with model checking since all models are false anyway. I do believe that all models are false, but for me the purpose of model checking is not to accept or reject a model, but to reveal aspects of the data that are not captured by the fitted model." (Andrew Gelman, "Some thoughts on the sociology of statistics", 2007)

"A complete data analysis will involve the following steps: (i) Finding a good model to fit the signal based on the data. (ii) Finding a good model to fit the noise, based on the residuals from the model. (iii) Adjusting variances, test statistics, confidence intervals, and predictions, based on the model for the noise." (DeWayne R Derryberry, "Basic data analysis for time series with R", 2014)

"Either a logarithmic or a square-root transformation of the data would produce a new series more amenable to fit a simple trigonometric model. It is often the case that periodic time series have rounded minima and sharp-peaked maxima. In these cases, the square root or logarithmic transformation seems to work well most of the time." (DeWayne R Derryberry, "Basic data analysis for time series with R", 2014)

"Once a model has been fitted to the data, the deviations from the model are the residuals. If the model is appropriate, then the residuals mimic the true errors. Examination of the residuals often provides clues about departures from the modeling assumptions. Lack of fit - if there is curvature in the residuals, plotted versus the fitted values, this suggests there may be whole regions where the model overestimates the data and other whole regions where the model underestimates the data. This would suggest that the current model is too simple relative to some better model." (DeWayne R Derryberry, "Basic data analysis for time series with R", 2014)

"Prediction about the future assumes that the statistical model will continue to fit future data. There are several reasons this is often implausible, but it also seems clear that the model will often degenerate slowly in quality, so that the model will fit data only a few periods in the future almost as well as the data used to fit the model. To some degree, the reliability of extrapolation into the future involves subject-matter expertise." (DeWayne R Derryberry, "Basic data analysis for time series with R", 2014

"An oft-repeated rule of thumb in any sort of statistical model fitting is 'you can't fit a model with more parameters than data points'. This idea appears to be as wide-spread as it is incorrect. On the contrary, if you construct your models carefully, you can fit models with more parameters than datapoints [...]. A model with more parameters than datapoints is known as an under-determined system, and it's a common misperception that such a model cannot be solved in any circumstance. [...] this misconception, which I like to call the 'model complexity myth' [...] is not true in general, it is true in the specific case of simple linear models, which perhaps explains why the myth is so pervasive." (Jake Vanderplas, "The Model Complexity Myth", 2015)

"Supervised learning, or function approximation, is simply fitting data to a function of any variety.  […] Unsupervised learning involves figuring out what makes the data special. […] Reinforcement learning involves figuring out how to play a multistage game with rewards and payoffs. Think of it as the algorithms that optimize the life of something." (Matthew Kirk, "Thoughtful Machine Learning", 2015)

"Often when people relate essentially the same variable in two different groups, or at two different times, they see this same phenomenon - the tendency of the response variable to be closer to the mean than the predicted value. Unfortunately, people try to interpret this by thinking that the performance of those far from the mean is deteriorating, but it’s just a mathematical fact about the correlation. So, today we try to be less judgmental about this phenomenon and we call it regression to the mean. We managed to get rid of the term 'mediocrity', but the name regression stuck as a name for the whole least squares fitting procedure - and that’s where we get the term regression line." (Richard D De Veaux et al, "Stats: Data and Models", 2016)

"Just as they did thirty years ago, machine learning programs (including those with deep neural networks) operate almost entirely in an associational mode. They are driven by a stream of observations to which they attempt to fit a function, in much the same way that a statistician tries to fit a line to a collection of points. Deep neural networks have added many more layers to the complexity of the fitted function, but raw data still drives the fitting process. They continue to improve in accuracy as more data are fitted, but they do not benefit from the 'super-evolutionary speedup'."  (Judea Pearl & Dana Mackenzie, "The Book of Why: The new science of cause and effect", 2018)

"Random forests are essentially an ensemble of trees. They use many short trees, fitted to multiple samples of the data, and the predictions are averaged for each observation. This helps to get around a problem that trees, and many other machine learning techniques, are not guaranteed to find optimal models, in the way that linear regression is. They do a very challenging job of fitting non-linear predictions over many variables, even sometimes when there are more variables than there are observations. To do that, they have to employ 'greedy algorithms', which find a reasonably good model but not necessarily the very best model possible." (Robert Grant, "Data Visualization: Charts, Maps and Interactive Graphics", 2019)

"Fitting models to data is a bit like designing shirts to fit people. If you fit a shirt too closely to one particular person, it will fit other people poorly. Likewise, a model that fits a particular data set too well might not fit other data sets well." (Rahul Parsa, [Speaking to the Iowa SAS User’s Group])

🔭Data Science: Transformations (Just the Quotes)

"Logging size transforms the original skewed distribution into a more symmetrical one by pulling in the long right tail of the distribution toward the mean. The short left tail is, in addition, stretched. The shift toward symmetrical distribution produced by the log transform is not, of course, merely for convenience. Symmetrical distributions, especially those that resemble the normal distribution, fulfill statistical assumptions that form the basis of statistical significance testing in the regression model." (Edward R Tufte, "Data Analysis for Politics and Policy", 1974)

"Logging skewed variables also helps to reveal the patterns in the data. […] the rescaling of the variables by taking logarithms reduces the nonlinearity in the relationship and removes much of the clutter resulting from the skewed distributions on both variables; in short, the transformation helps clarify the relationship between the two variables. It also […] leads to a theoretically meaningful regression coefficient." (Edward R Tufte, "Data Analysis for Politics and Policy", 1974)

"The logarithmic transformation serves several purposes: (1) The resulting regression coefficients sometimes have a more useful theoretical interpretation compared to a regression based on unlogged variables. (2) Badly skewed distributions - in which many of the observations are clustered together combined with a few outlying values on the scale of measurement - are transformed by taking the logarithm of the measurements so that the clustered values are spread out and the large values pulled in more toward the middle of the distribution. (3) Some of the assumptions underlying the regression model and the associated significance tests are better met when the logarithm of the measured variables is taken." (Edward R Tufte, "Data Analysis for Politics and Policy", 1974)

"The logarithm is one of many transformations that we can apply to univariate measurements. The square root is another. Transformation is a critical tool for visualization or for any other mode of data analysis because it can substantially simplify the structure of a set of data. For example, transformation can remove skewness toward large values, and it can remove monotone increasing spread. And often, it is the logarithm that achieves this removal." (William S Cleveland, "Visualizing Data", 1993)

"Compound errors can begin with any of the standard sorts of bad statistics - a guess, a poor sample, an inadvertent transformation, perhaps confusion over the meaning of a complex statistic. People inevitably want to put statistics to use, to explore a number's implications. [...] The strengths and weaknesses of those original numbers should affect our confidence in the second-generation statistics." (Joel Best, "Damned Lies and Statistics: Untangling Numbers from the Media, Politicians, and Activists", 2001)

"All forms of complex causation, and especially nonlinear transformations, admittedly stack the deck against prediction. Linear describes an outcome produced by one or more variables where the effect is additive. Any other interaction is nonlinear. This would include outcomes that involve step functions or phase transitions. The hard sciences routinely describe nonlinear phenomena. Making predictions about them becomes increasingly problematic when multiple variables are involved that have complex interactions. Some simple nonlinear systems can quickly become unpredictable when small variations in their inputs are introduced." (Richard N Lebow, "Forbidden Fruit: Counterfactuals and International Relations", 2010)

"Either a logarithmic or a square-root transformation of the data would produce a new series more amenable to fit a simple trigonometric model. It is often the case that periodic time series have rounded minima and sharp-peaked maxima. In these cases, the square root or logarithmic transformation seems to work well most of the time." (DeWayne R Derryberry, "Basic data analysis for time series with R", 2014)

"Transformations of data alter statistics. For example, the mean of a data set can be found, but it is not easy to relate the mean of a data set to the mean of the logarithm of that data set. The median is far friendlier to transformations. If the median of a data set is found, then the logarithm of the data set is analyzed; the median of the log transformed data will be the log of the original median." (DeWayne R Derryberry, "Basic data analysis for time series with R", 2014) 

"Transforming data to measurements of a different kind can clarify and simplify hypotheses that have already been generated and can reveal patterns that would otherwise be hidden." (Forrest W Young et al, "Visual Statistics: Seeing data with dynamic interactive graphics", 2016)

"Feature generation (or engineering, as it is often called) is where the bulk of the time is spent in the machine learning process. As social science researchers or practitioners, you have spent a lot of time constructing features, using transformations, dummy variables, and interaction terms. All of that is still required and critical in the machine learning framework. One difference you will need to get comfortable with is that instead of carefully selecting a few predictors, machine learning systems tend to encourage the creation of lots of features and then empirically use holdout data to perform regularization and model selection. It is common to have models that are trained on thousands of features." (Rayid Ghani & Malte Schierholz, "Machine Learning", 2017)

"Data analysis and data mining are concerned with unsupervised pattern finding and structure determination in data sets. The data sets themselves are explicitly linked as a form of representation to an observational or otherwise empirical domain of interest. 'Structure' has long been understood as symmetry which can take many forms with respect to any transformation, including point, translational, rotational, and many others. Symmetries directly point to invariants, which pinpoint intrinsic properties of the data and of the background empirical domain of interest. As our data models change, so too do our perspectives on analysing data." (Fionn Murtagh, "Data Science Foundations: Geometry and Topology of Complex Hierarchic Systems and Big Data Analytics", 2018)

"Many statistical procedures perform more effectively on data that are normally distributed, or at least are symmetric and not excessively kurtotic (fat-tailed), and where the mean and variance are approximately constant. Observed time series frequently require some form of transformation before they exhibit these distributional properties, for in their 'raw' form they are often asymmetric." (Terence C Mills, "Applied Time Series Analysis: A practical guide to modeling and forecasting", 2019)

🔭Data Science: Gradients (Just the Quotes)

"There are many control parameters to a learning system. The question is to identify, at a sufficiently high level, the ones that can play a key role in sequencing effects. Because learning can be seen as the search for an optimal hypothesis in a given space under an inductive criteria defined over the training set, three means to control learning readily appear. The first one corresponds to a change of the hypothesis space. The second consists in modifying the optimization landscape. This can be done by changing either the training set (for instance, by a forgetting mechanism) or the inductive criteria. Finally, one can also fiddle with the exploration process. For instance, in the case of a gradient search, slowing down the search process can prevent the system from having time to find the local optimum, which, in turn, can introduce sequencing effects." (Antoine Cornuéjol, "The Necessity of Order in Machine Learning: Is Order in Order?", 2007)

"Deep learning is about using a stacked hierarchy of feature detectors. [...] we use pattern detectors and we build them into networks that are arranged in hundreds of layers and then we adjust the links between these layers, usually using some kind of gradient descent." (Joscha Bach,Joscha: Computational Meta-Psychology", 2015)

"Boosting is a non-linear flexible regression technique that helps increase the accuracy of trees by assigning more weights to wrong predictions. The reason for inducing more weight is so the model can emphasize more on these wrongly predicted samples and tune itself to increase accuracy. The gradient boosting method solves the inherent problem in boosting trees" (i.e., low speed and human interpretability). The algorithm supports parallelism by specifying the number of threads." (Danish Haroon,Python Machine Learning Case Studies", 2017)

"In Boosting, the selection of samples is done by giving more and more weight to hard-to-classify observations. Gradient boosting classification produces a prediction model in the form of an ensemble of weak predictive models, usually decision trees. It generalizes the model by optimizing for the arbitrary differentiable loss function. At each stage, regression trees fit on the negative gradient of binomial or multinomial deviance loss function." (Danish Haroon,Python Machine Learning Case Studies", 2017)

"The beauty of quantum machine learning is that we do not need to depend on an algorithm like gradient descent or convex objective function. The objective function can be nonconvex or something else." (Amit Ray,Quantum Computing Algorithms for Artificial Intelligence", 2018)

"A critical aspect of neural networks is their ability to learn from data. This learning occurs during the training phase, where the network is exposed to vast datasets, allowing it to adjust its internal parameters - the weights and biases associated with each neuron. The goal of this adjustment is to minimize the difference between the network's predictions and the actual outcomes, a process known as optimization. Through techniques such as gradient descent and backpropagation, neural networks iteratively refine their parameters, enhancing their ability to make accurate predictions or decisions based on new input."(Hayden Van Der Post, "Neural Network: Mastering the Art of Algorithmic Trading", 2024)

"The essence of backpropagation is captured in the gradient descent algorithm, which seeks to minimize the error by iteratively adjusting the weights in the direction that most steeply decreases the error function. This rigorous process requires a meticulous balance; too large a weight adjustment can lead to erratic learning, while too small an adjustment can trap the network in local minima. In algorithmic trading, the capacity to learn from past predictions and refine strategies accordingly is invaluable, allowing for the continual optimization of trading algorithms in alignment with market dynamics." (Hayden Van Der Post, "Neural Network: Mastering the Art of Algorithmic Trading", 2024)

"The process of defining a custom loss function calls for a clear understanding of the objective of your task and the nature of your data. This requires understanding how your model learns and how its predictions can be compared to the actual targets in a meaningful and helpful way. Additionally, it’s crucial to consider the balance between complexity and interpretability of your loss function. While complex functions might capture the task’s intricacies better, they might also make training more challenging and results harder to interpret. At a lower level, we also have to make sure that a custom loss function is differentiable - that is, it must have a derivative everywhere. This requirement arises because learning in these models is accomplished through gradient descent, which requires computing the derivative of the loss function." (Sinan Ozdemir, "Quick Start Guide to Large Language Models: Strategies and Best Practices for Using ChatGPT and Other LLMs", 2024) 

"Transformers are complex models built like LEGO blocks using multiple smart and specialized components. [...] Briefly, a vanilla transformer model consists of separate stacks of encoders and decoders. Each encoder block includes multi-head self-attention, enabling the model to capture relationships between tokens regardless of their positions. Residual connections help maintain gradient flow, preventing the vanishing gradient problem. Layer normalization ensures training stability, and feed-forward layers introduce non-linearity and learn complex token interactions. Decoder blocks contain the same components but also include an encoder-decoder attention mechanism to incorporate context from the encoder. The model uses embedding layers to convert tokens into a continuous latent space for contextual learning and positional encoding to preserve the order of tokens in the sequence." (Joseph Babcock & Raghav Bali, "Generative AI with Python and PyTorch" 2nd. Ed., 2025)

"While the backpropagation procedure provides a way to update interior weights within the network in a principled way, it has several shortcomings that make deep networks difficult to use in practice. One is the problem of vanishing gradients. [...] As the value of the sigmoid function increases or decreases toward the extremes (0 or 1, representing either 'off' or 'on' ), the values of the gradient vanish to near zero. This means that the updates to and , which are products of these gradients from hidden activation functions , shrink toward zero, making the weights change little between iterations and making the parameters of the hidden layer neurons change very slowly during backpropagation. Clearly, one problem here is that the sigmoid function saturates; thus, choosing another nonlinearity might circumvent this problem." (Joseph Babcock & Raghav Bali, "Generative AI with Python and PyTorch" 2nd. Ed., 2025)

"The same difficulties that characterize training deep feedforward networks also apply to RNNs; gradients tend to die out over long distances using traditional activation functions (or explode if the gradients become greater than 1). However, unlike feedforward networks, RNNs aren’t trained with traditional backpropagation, but rather a variant known as Backpropagation through Time (BPTT): the network is unrolled, as before, and backpropagation is used, averaging over errors at each time point (since an 'output', the hidden state, occurs at each step). Also, in the case of RNNs, we run into the problem that the network has a very short memory; it only incorporates information from the most recent unit before the current one and has trouble maintaining long-range context. For applications such as translation, this is clearly a problem, as the interpretation of a word at the end of a sentence may depend on terms near the beginning, not just those directly preceding it." (Joseph Babcock & Raghav Bali, "Generative AI with Python and PyTorch" 2nd. Ed., 2025)

🔭Data Science: Optimization (Just the Quotes)

"[...] any hope that we are smart enough to find even transiently optimum solutions to our data analysis problems is doomed to failure, and, indeed, if taken seriously, will mislead us in the allocation of effort, thus wasting both intellectual and computational effort." (John W Tukey, "Choosing Techniques for the Analysis of Data", 1981)

"In constructing a model, we always attempt to maximize its usefulness. This aim is closely connected with the relationship among three key characteristics of every systems model: complexity, credibility, and uncertainty. This relationship is not as yet fully understood. We only know that uncertainty (predictive, prescriptive, etc.) has a pivotal role in any efforts to maximize the usefulness of systems models. Although usually (but not always) undesirable when considered alone, uncertainty becomes very valuable when considered in connection to the other characteristics of systems models: in general, allowing more uncertainty tends to reduce complexity and increase credibility of the resulting model. Our challenge in systems modelling is to develop methods by which an optimal level of allowable uncertainty can be estimated for each modelling problem." (George J Klir & Bo Yuan, "Fuzzy Sets and Fuzzy Logic: Theory and Applications", 1995)

"A strategy is usually expressed by a set of heuristic rules. The heuristic rules ease the process of searching for an optimal solution. The process is usually iterative and at one step either the global optimum for the whole problem (state) space is found and the process stops, or a local optimum for a subspace of the state space of the problem is found and the problem continues, if it is possible to improve." (Nikola K Kasabov, "Foundations of Neural Networks, Fuzzy Systems, and Knowledge Engineering", 1996)

"Heuristic methods may aim at local optimization rather than at global optimization, that is, the algorithm optimizes the solution stepwise, finding the best solution at each small step of the solution process and 'hoping' that the global solution, which comprises the local ones, would be satisfactory." (Nikola K Kasabov, "Foundations of Neural Networks, Fuzzy Systems, and Knowledge Engineering", 1996)

"[...] an algorithm’s average performance is determined by how 'aligned' it is with the underlying probability distribution over optimization problems on which it is run." (David H Wolpert & William G Macready, "No free lunch theorems for optimization", IEEE Transactions on Evolutionary Computation 1 (1), 1997)

"[...] despite the NFL theorems, algorithms can have a priori distinctions that hold even if nothing is specified concerning the optimization problems. In particular, we show that there can be 'head-to-head' minimax distinctions between a pair of algorithms, i.e., that when considering one function at a time ,a pair of algorithms may be distinguishable, even if they are not when one looks over all functions." (David H Wolpert & William G Macready, "No free lunch theorems for optimization", IEEE Transactions on Evolutionary Computation 1 (1), 1997)

"[...] if you have a general optimization involving uncertainty and very little prior knowledge, the situation is rather hopeless. Due to the NFL theorem, you cannot do any better than a blind search. Each blind search evaluation will be very expensive, with no hope of future improvement, theoretical or otherwise. And the number of performance searches required to get anywhere is simply too large. Neither time nor theoretical or technological progress are on your side. No grand optimization algorithm to end all algorithms is possible." (Yu-Chi Ho, "The no free lunch theorem and the human-machine interface", IEEE Control Systems Magazine, 1999)

"The No Free Lunch (NFL) theorem […] tells us that without any structural assumptions on an optimization problem, no algorithm can perform better on average than blind search." (Yu-Chi Ho, "The no free lunch theorem and the human-machine interface", IEEE Control Systems Magazine, 1999)

"A model is an imitation of reality and a mathematical model is a particular form of representation. We should never forget this and get so distracted by the model that we forget the real application which is driving the modelling. In the process of model building we are translating our real world problem into an equivalent mathematical problem which we solve and then attempt to interpret. We do this to gain insight into the original real world situation or to use the model for control, optimization or possibly safety studies." (Ian T Cameron & Katalin Hangos, "Process Modelling and Model Analysis", 2001)

"Because No Free Lunch theorems dictate that no optimization algorithm can be considered more efficient than any other when considering all possible functions, the desired function class plays a prominent role in the model. In particular, this provides a tractable way to answer the traditionally difficult question of what algorithm is best matched to a particular class of functions. Among the benefits of the model are the ability to specify the function class in a straightforward manner, a natural way to specify noisy or dynamic functions, and a new source of insight into No Free Lunch theorems for optimization." (Christopher K Monson, "No Free Lunch, Bayesian Inference, and Utility: A Decision-Theoretic Approach to Optimization", [thesis] 2006)

"In effect, machine learning research has already brought us several interesting concepts. Most prominently, it has stressed the benefit of distinguishing between the properties of the hypothesis space - its richness and the valuation scheme associated with it - and the characteristics of the actual search procedure in this space, guided by the training data. This in turn suggests two important factors related to sequencing effects, namely forgetting and the nonoptimality of the search procedure. Both are key parameters than need to be thoroughly understood if one is to master sequencing effects." (Antoine Cornuéjol, "The Necessity of Order in Machine Learning: Is Order in Order?", 2007)

"There are many control parameters to a learning system. The question is to identify, at a sufficiently high level, the ones that can play a key role in sequencing effects. Because learning can be seen as the search for an optimal hypothesis in a given space under an inductive criteria defined over the training set, three means to control learning readily appear. The first one corresponds to a change of the hypothesis space. The second consists in modifying the optimization landscape. This can be done by changing either the training set (for instance, by a forgetting mechanism) or the inductive criteria. Finally, one can also fiddle with the exploration process. For instance, in the case of a gradient search, slowing down the search process can prevent the system from having time to find the local optimum, which, in turn, can introduce sequencing effects." (Antoine Cornuéjol, "The Necessity of Order in Machine Learning: Is Order in Order?", 2007)

"There may be no significant difference between the point of view of inferring the true structure and that of making a prediction if an infinitely large quantity of data is available or if the data are noiseless. However, in modeling based on a finite quantity of real data, there is a significant gap between these two points of view, because an optimal model for prediction purposes may be different from one obtained by estimating the 'true model'." (Genshiro Kitagawa & Sadanori Konis, "Information Criteria and Statistical Modeling", 2007)

"A priori, it is clear that no method will always be the best [...]. However, it is reasonable to argue that each method will have a set of functions, a type of data, and a range of sample sizes for which it is optimal – a sort of catchment region for each procedure. Ideally, one could partition a space of regression problems into catchment regions, depending on which methods were under consideration, and determine which catchment region seemed most appropriate for each method. This ideal solution would amount to a selection principle for nonparametric methods. Unfortunately, it is unclear how to do this, not least because the catchment regions are unknown." (Bertrand Clarke et al, "Principles and Theory for Data Mining and Machine Learning", 2009)

"When generating trees, it is usually optimal to grow a larger tree than is justifiable and then prune it back. The main reason this works well is that stop splitting rules do not look far enough forward. That is, stop splitting rules tend to underfit, meaning that even if a rule stops at a split for which the next candidate splits give little improvement, it may be that splitting them one layer further will give a large improvement in accuracy." (Bertrand Clarke et al, "Principles and Theory for Data Mining and Machine Learning", 2009)

"The problem of comparing classifiers is not at all an easy task. There is no single classifier that works best on all given problems, phenomenon related to the 'No-free-lunch' metaphor, i.e., each classifier (’restaurant’) provides a specific technique associated with the corresponding costs (’menu’ and ’price’ for it). It is hence up to us, using the information and knowledge at hand, to find the optimal trade-off." (Florin Gorunescu, "Data Mining Concepts, Models and Techniques", 2011)

"In an emergency, a data product that just produces more data is of little use. Data scientists now have the predictive tools to build products that increase the common good, but they need to be aware that building the models is not enough if they do not also produce optimized, implementable outcomes." (Jeremy Howard et al, "Designing Great Data Products", 2012)

"Briefly speaking, to solve a Machine Learning problem means you optimize a model to fit all the data from your training set, and then you use the model to predict the results you want. Therefore, evaluating a model need to see how well it can be used to predict the data out of the training set. Usually there are three types of the models: underfitting, fair and overfitting model [...]. If we want to predict a value, both (a) and (c) in this figure cannot work well. The underfitting model does not capture the structure of the problem at all, and we say it has high bias. The overfitting model tries to fit every sample in the training set and it did it, but we say it is of high variance. In other words, it fails to generalize new data." (Shudong Hao, "A Beginner’s Tutorial for Machine Learning Beginners", 2014)

"Deep learning is an area of machine learning that emerged from the intersection of neural networks, artificial intelligence, graphical modeling, optimization, pattern recognition and signal processing." (N D Lewis, "Deep Learning Made Easy with R: A Gentle Introduction for Data Science", 2016)

"Machine learning tends to be more focused on developing efficient algorithms that scale to large data in order to optimize the predictive model. Statistics generally pays more attention to the probabilistic theory and underlying structure of the model." (Peter C Bruce & Andrew G Bruce, "Statistics for Data Scientists: 50 Essential Concepts", 2016)

"Many classification and regression algorithms optimize a certain criteria or loss function. For example, logistic regression attempts to minimize the deviance. In the literature, some propose to modify the loss function in order to avoid the problems caused by a rare class. In practice, this is hard to do: classification algorithms can be complex and difficult to modify. Weighting is an easy way to change the loss function, discounting errors for records with low weights in favor of records of higher weights." (Peter C Bruce & Andrew G Bruce, "Statistics for Data Scientists: 50 Essential Concepts", 2016)

"Optimization is more than finding the best simulation results. It is itself a complex and evolving field that, subject to certain information constraints, allows data scientists, statisticians, engineers, and traders alike to perform reality checks on modeling results." (Chris Conlan, "Automated Trading with R: Quantitative Research and Platform Development", 2016)

"Data scientists should have some domain expertise. Most data science projects begin with a real-world, domain-specific problem and the need to design a data-driven solution to this problem. As a result, it is important for a data scientist to have enough domain expertise that they understand the problem, why it is important, and how a data science solution to the problem might fit into an organization’s processes. This domain expertise guides the data scientist as she works toward identifying an optimized solution." (John D Kelleher & Brendan Tierney, "Data Science", 2018)

"Optimization is the process of finding the maximum or minimum of a given function (also known as a fitness function), by calculating the best values for its variables (also known as a 'solution'). Despite the simplicity of this definition, it is not an easy process; often involves restrictions, as well as complex relationships among the various variables. Even though some functions can be optimized using some mathematical process, most functions we encounter in data science are not as simple, requiring a more advanced technique." (Yunus E Bulut & Zacharias Voulgaris, "AI for Data Science: Artificial Intelligence Frameworks and Functionality for Deep Learning, Optimization, and Beyond", 2018)

"Optimization systems (or optimizers, as they are often referred to) aim to optimize in a systematic way, oftentimes using a heuristics-based approach. Such an approach enables the AI system to use a macro level concept as part of its low-level calculations, accelerating the whole process and making it more light-weight. After all, most of these systems are designed with scalability in mind, so the heuristic approach is most practical." (Yunus E Bulut & Zacharias Voulgaris, "AI for Data Science: Artificial Intelligence Frameworks and Functionality for Deep Learning, Optimization, and Beyond", 2018)

"Quantum machine learning promises to discover the optimal network topologies and hyperparameters automatically without human intervention. (Amit Ray, "Quantum Computing Algorithms for Artificial Intelligence", 2018)

"Unfortunately, because the search space is large, automatic techniques for optimization are not sufficient. Instead, the process of selecting an optimal model is complex and iterative, involving repeated cycling through feature engineering, model selection, and hyperparameter tuning. Results are evaluated after each iteration in order to arrive at the best combination of features, model, and parameters that will solve the problem at hand." (Benjamin Bengfort et al, "Applied Text Analysis with Python: Enabling Language-Aware Data Products with Machine Learning", 2018)

"The no free lunch theorems set limits on the range of optimality of any method. That is, each methodology has a ‘catchment area’ where it is optimal or nearly so. Often, intuitively, if the optimality is particularly strong then the effectiveness of the methodology falls off more quickly outside its catchment area than if its optimality were not so strong. Boosting is a case in point: it seems so well suited to binary classification that efforts to date to extend it to give effective classification (or regression) more generally have not been very successful. Overall, it remains to characterize the catchment areas where each class of predictors performs optimally, performs generally well, or breaks down." (Bertrand S Clarke & Jennifer L. Clarke, "Predictive Statistics: Analysis and Inference beyond Models", 2018)

"Cross-validation is a useful tool for finding optimal predictive models, and it also works well in visualization. The concept is simple: split the data at random into a 'training' and a 'test' set, fit the model to the training data, then see how well it predicts the test data. As the model gets more complex, it will always fit the training data better and better. It will also start off getting better results on the test data, but there comes a point where the test data predictions start going wrong." (Robert Grant, "Data Visualization: Charts, Maps and Interactive Graphics", 2019)

"Random forests are essentially an ensemble of trees. They use many short trees, fitted to multiple samples of the data, and the predictions are averaged for each observation. This helps to get around a problem that trees, and many other machine learning techniques, are not guaranteed to find optimal models, in the way that linear regression is. They do a very challenging job of fitting non-linear predictions over many variables, even sometimes when there are more variables than there are observations. To do that, they have to employ 'greedy algorithms', which find a reasonably good model but not necessarily the very best model possible." (Robert Grant, "Data Visualization: Charts, Maps and Interactive Graphics", 2019)

"A key point is that an increased number of attributes relative to training points provides additional degrees of freedom to the optimization problem, as a result of which irrelevant solutions become more likely. Therefore, a natural solution is to add a penalty for using additional features." (Charu C Aggarwal, "Artificial Intelligence: A Textbook", 2021)

"Generally speaking, all the unsupervised embedding algorithms based on matrix factorization use the same principle. They all factorize an input graph expressed as a matrix in different components. The main difference between each method lies in the loss function used during the optimization process and the constraints/formulations posed for the V and H matrices. Indeed, different loss functions allow the creation of an embedding space that emphasizes specific properties of the input graph." (Aldo Marzullo et al, "Graph Machine Learning" 2nd Ed., 2025)

🔭Data Science: Reinforcement Learning (Just the Quotes)

"A neural network training method based on presenting input vector x and looking at the output vector calculated by the network. If it is considered 'good', then a 'reward' is given to the network in the sense that the existing connection weights get increased, otherwise the network is "punished"; the connection weights, being considered as 'not appropriately set,' decrease." (Nikola K Kasabov, "Foundations of Neural Networks, Fuzzy Systems, and Knowledge Engineering", 1996)

"A training paradigm where the neural network is presented with a sequence of input data, followed by a reinforcement signal." (Joseph P Bigus, "Data Mining with Neural Networks: Solving Business Problems from Application Development to Decision Support", 1996)

"learning mode in which adaptive changes of the parameters due to reward or punishment depend on the final outcome of a whole sequence of behavior. The results of learning are evaluated by some performance index." (Teuvo Kohonen, "Self-Organizing Maps" 3rd Ed., 2001)

"A learning method which interprets feedback from an environment to learn optimal sets of condition/response relationships for problem solving within that environment" (Pi-Sheng Deng, "Genetic Algorithm Applications to Optimization Modeling", Encyclopedia of Artificial Intelligence, 2009)

"A sub-area of machine learning concerned with how an agent ought to take actions in an environment so as to maximize some notion of long-term reward. Reinforcement learning algorithms attempt to find a policy that maps states of the world to the actions the agent ought to take in those states. Differently from supervised learning, in this case there is no target value for each input pattern, only a reward based of how good or bad was the action taken by the agent in the existent environment." (Marley Vellasco et al, "Hierarchical Neuro-Fuzzy Systems" Part II, Encyclopedia of Artificial Intelligence, 2009)

"a type of machine learning in which an agent learns, through its own experience, to navigate through an environment, choosing actions in order to maximize the sum of rewards." (Lisa Torrey & Jude Shavlik, "Transfer Learning",  2010)

"a machine learning technique whereby actions are associated with credits or penalties, sometimes with delay, and whereby, after a series of learning episodes, the learning agent has developed a model of which action to choose in a particular environment, based on the expectation of accumulated rewards." (Apostolos Georgas, "Scientific Workflows for Game Analytics", Encyclopedia of Business Analytics and Optimization", 2014)

"A type of machine learning in which the machine learns what to do by discovering through trial and error the way to maximize a reward." (Gloria Phillips-Wren, "Intelligent Systems to Support Human Decision Making", 2014)

"it stands, in the context of computational learning, for a family of algorithms aimed at approximating the best policy to play in a certain environment (without building an explicit model of it) by increasing the probability of playing actions that improve the rewards received by the agent." (Fernando S Oliveira, "Reinforcement Learning for Business Modeling", 2014)

"a special case of supervised learning in which the cognitive computing system receives feedback on its performance to guide it to a goal or good outcome." (Judith S Hurwitz, "Cognitive Computing and Big Data Analytics", 2015)

"The knowledge is obtained using rewards and punishments which there is an agent (learner) that acts autonomously and receives a scalar reward signal that is used to evaluate the consequences of its actions." (Nuno Pombo et al, "Machine Learning Approaches to Automated Medical Decision Support Systems", 2015)

"It is also known as learning with a critic. The agent takes a sequence of actions and receives a reward/penalty only at the very end, with no feedback during the intermediate actions. Using this limited information, the agent should learn to generate the actions to maximize the reward in later trials. For example, in chess, we do a set of moves, and at the very end, we win or lose the game; so we need to figure out what the actions that led us to this result were and correspondingly credit them." (Ethem Alpaydın, "Machine learning : the new AI", 2016)

"A learning algorithm for a robot or a software agent to take actions in an environment so as to maximize the sum of rewards through trial and error." (Tomohiro Yamaguchi et al, "Analyzing the Goal-Finding Process of Human Learning With the Reflection Subtask", 2018)

"Training/learning method aiming to automatically determine the ideal behavior within a specific context based on rewarding desired behaviors and/or punishing undesired one." (Ioan-Sorin Comşa et al, "Guaranteeing User Rates With Reinforcement Learning in 5G Radio Access Networks", 2019)

"Brach of the Artificial Intelligence field devoted to obtaining optimal control sequences for agents only by interacting with a concrete dynamical system." (Juan Parras & Santiago Zazo, "The Threat of Intelligent Attackers Using Deep Learning: The Backoff Attack Case", 2020)

"Machine learning approaches often used in robotics. A reward is used to teach a system a desired behavior." (Jörg Frochte et al, "Concerning the Integration of Machine Learning Content in Mechatronics Curricula", 2020)

"This area of deep learning includes methods which iterates over various steps in a process to get the desired results. Steps that yield desirable outcomes are content and steps that yield undesired outcomes are reprimanded until the algorithm is able to learn the given optimal process. In unassuming terms, learning is finished on its own or effort on feedback or content-based learning." (Amit K Tyagi & Poonam Chahal, "Artificial Intelligence and Machine Learning Algorithms", 2020)

"A machine learning paradigm that utilizes evaluative feedback to cultivate desired behavior." (Marten H L Kaas, "Raising Ethical Machines: Bottom-Up Methods to Implementing Machine Ethics", 2021)

"Is an area of machine learning that learn for the experience in order to maximize the rewards." (Walaa Alnasser et al, "An Overview on Protecting User Private-Attribute Information on Social Networks", 2021)

"Reinforcement learning is also a subset of AI algorithms which creates independent, self-learning systems through trial and error. Any positive action is assigned a reward and any negative action would result in a punishment. Reinforcement learning can be used in training autonomous vehicles where the goal would be obtaining the maximum rewards." (Vijayaraghavan Varadharajan & Akanksha Rajendra Singh, "Building Intelligent Cities: Concepts, Principles, and Technologies", 2021)

"Reinforcement Learning uses a kind of algorithm that works by trial and error, where the learning is enabled using a feedback loop of 'rewards' and 'punishments'. When the algorithm is fed a dataset, it treats the environment like a game, and is told whether it has won or lost each time it performs an action. In this way, reinforcement learning algorithms build up a picture of the 'moves' that result in success, and those that don't." (Accenture)